I have been working on a Delay FX and an improved ACID engine.
The delay will work as a send FX, like the reverb.
The parameters of the delay are controlled by CC.
You can get the Beta firmware with different engines configuration here:
https://drive.google.com/drive/folders/1wuGZ8pEhM5GksuAIcmweiJfLJW9U8IDx?usp=sharing
ACID controls:
- Harm: Distortion amount
- Timbre: Waveform from triangle, saw, square and PWM
- Morph: Accent amount (accent adds distortion and filter envelope proportionally to Morph).
Note: accent can be activated with MIDI (note velocity > 100) or sending any voltage to the AMP CV input.
New CC controls:
// FX Sends
CC_Chorus = 25,
CC_Space = 26,
CC_Delay = 27,
CC_Engine = 30,
// FX Global
CC_SpaceLength = 40,
CC_SpaceLp = 41,
CC_DelayTime = 44,
CC_DelayFeedback = 45,
CC_DelaySpread = 46,
Also there’s a new set of settings with new goodies
polycv 1 // 0: play voices in unison 1: enables polyphony with cv
encpri 0 // 0: encoder turn selects engine (push and turn for voice/part selection) 1: encoder turn selects voice/part (push and turn for engine selection)
cvpart 0 // 0: part CV selects which part is affected by CV modulation 1: part CV modulates the part engine
mpeena 0 // mpe enabled
pbrang 2 // pitch bend range in semitones
hpfilt 0 // Enable a High pass filter that replaces the chorus FX
delena 1 // delay enable. Overrides noise
vumetr 1 // Enable the VU Meter to be shown in LEDs 9 and 10
ledalw 1 // Show a subtle indication of the selected part of voice in the main screen